The Sunny Tripower 8.0–10.0 makes PV systems in private households and small commercial applications especially powerful. It combines top inverter performance with maximum ease and comfort for its users. With integrated services and shade solutions, it can meet any challenge found on roofs. The Sunny Tripower reliably ensures maximum solar yields and reduces electricity costs.
Quick and Easy to Install
With its reduced weight, this three-phase Sunny Tripower can be installed quickly while taking up minimal space. The Sunny Tripower can be commissioned quickly via smartphone or tablet thanks to its integrated web interface.
-
- One-person installation due to low weight of 20.5 kg
- Compact design means minimum space requirements
- Intuitive commissioning and local monitoring via a smartphone or tablet
The Sunny Tripower has it all, with established product features such as SMA ShadeFix and SMA Smart Connected that are now supplemented with integrated TS4-R communication for module optimization. Thanks to this, even shade on the module is no problem. The SMA ShadeFix integrated shade management system ensures maximum yields in light shade. For large amounts of shade or complex roof structures, TS4-R module optimizers can be installed easily and selectively for maximum yields.
- Integrated shade management with SMA ShadeFixF and TS4-R communication
- Integrated SMA Smart Connected service
- Free online monitoring via Sunny Portal and Sunny Places
- Dynamic active power limitation
| Technical data | Sunny Tripower 8.0 | Sunny Tripower 10.0 | |
| Input (DC) | |||
| Max. PV array power | 15000 Wp | 15000 Wp | |
| Max. input voltage | 1000 V | 1000 V | |
| MPP voltage range | 260 V to 800 V | 320 V to 800 V | |
| Rated input voltage | 580 V | 580 V | |
| Min. input voltage / initial input voltage | 125 V/ 150V | 125 V/ 150V | |
| Max. input current input A/ input B | 20A/12A | 20A/12A | |
| Max. DC short-circuit current input A / input B | 30A/ 18A | 30A/ 18A | |
| Number of independent MPP inputs / strings per MPP input | 2 / A:2; B:1 | 2 / A:2; B:1 | |
| Output (AC) | |||
| Rated power (at 230 V, 50 Hz) | 8000 W | 10000 W | |
| Max. apparent AC power | 8000 VA | 10000 VA | |
| Nominal AC voltage | 3 /N/PE; 220 V/ 380 V | 3 /N/PE; 220 V/ 380 V | |
| 3 /N/PE;230 V/ 400 V | 3 /N/PE;230 V/ 400 V | ||
| 3 /N/PE;240 V/ 415 V | 3 /N/PE;240 V/ 415 V | ||
| AC voltage range | 180 V to 280 V | 180 V to 280 V | |
| AC grid frequency / range | 50 Hz / 45 Hz to 55 Hz | 50 Hz / 45 Hz to 55 Hz | |
| 60 Hz / 55 Hz to 65 Hz | 60 Hz / 55 Hz to 65 Hz | ||
| Rated grid frequency/ rated grid voltage | 50Hz/230 V | 50Hz/230 V | |
| Max. output current | 3 x 12.1 A | 3 x 14.5 A | |
| Power factor at rated power / displacement power factor adjustable | 1 / 0.8 overexcited to 0.8 underexciied | 1 / 0.8 overexcited to 0.8 underexciied | |
| Feed-in phases / connection phases | 3 / 3 | 3 / 3 | |
| Efficiency | |||
| Max. efficiency / European efficiency | 98.3 %/ 97.7 % | 98.3 % / 98.0 % | |
| Protective devices | |||
| Input-side disconnection point | ● | ● | |
| Ground fault monitoring / grid monitoring | ● / ● | ● / ● | |
| DC reverse polarity protection / AC short circuit current capability / galvanically isolated | ● / ● / — | ● / ● / — | |
| Allipole-sensilive residual-current monitoring unit | ● | ● | |
| Protection class (according to IEC 61140) / surge category (according to IEC 606641) | I / III | I / III | |
| General data | |||
| Dimensions (W / 11/ D) | 460 mm / 497 mm / 176 mm (18.1 inches / 19.6 inches / 6.9 inches) | 460 mm / 497 mm / 176 mm (18.1 inches / 19.6 inches / 6.9 inches) | |
| Weight | 20.5 kg (45.2 ibs) | 20.5 kg (45.2 ibs) | |
| Operating temperature range | -25 °Cto +60 °C (-13 °F to +140 °F) | -25 °Cto +60 °C (-13 °F to +140 °F) | |
| Noise emission, typical | 30 dB(A) | 30 dB(A) | |
| Self-consumption (at night) | 5.0 W | 5.0 W | |
| Topology / cooling method | Transformerless / convection | Transformerless / convection | |
| Degree of protection (according to IEC 60529) | IP65 | IP65 | |
| Climatic category (according to IEC 60721-3-4) | 4K4H | 4K4H | |
| Max. permissible value for relative humidity ( non-condensing ) | 100% | 100% | |
| Features | |||
| DC connection / AC connection | SUNCUX / AC connector | SUNCUX / AC connector | |
| Display via smartphone, tablet, laptop | ● | ● | |
| Interfaces: MAN / Ethernet / R5485 | ● / ● / ● | ● / ● / ● | |
| Communication protocols | Modbus (SMA, Sunspec), Webconnect, SMA Data, TS4-R | Modbus (SMA, Sunspec), Webconnect, SMA Data, TS4-R | |
| Shade management: SMA Shadef ix (integrated) / T54-R | ● / ○ | ● / ○ | |
| Warranty: 5 / 10 / 15 years | ● / ○ / ○ | ● / ○ / ○ | |
| Certificates and permits (more available upon request) | AS 4777.2, C10/11, CE, CEI 021, EN 50438, G59/3-4, G83/2-1,DIN EN 62109 / IEC 62109, NEN-EN50438, OVE/ONORM E 8001-4-712 & TOR Dd, PPC, PPDS. RD1699, 514777, TR3.2.1, UTE C l 5-712. VDE-AR-N 4105,VDE0126-1.1, VFR 2014, RIG compliant | ||
| Certificates and approvals (planned) | DEWA, IEC 61727, IEC 62116, IE-EN50438, MEA, NBR16149, NT_Ley20.571, PEA, TR3.2.2 |
DEWA, IEC 61727, IEC 62116, IE-EN50438, MEA, NBR16149, NT_Ley20.571, PEA, TR3.2.2 |
|
| Country availability of SMA Smart Connected | AU, AT, BE, CH, DE, ES, FR, IT, LU, NL, UK | AU, AT, BE, CH, DE, ES, FR, IT, LU, NL, UK | |
| Type designation | STP8.0-3AV-40 | STP10.0-3AV-40 | |
SUNNY TRIPOWER 8.0 / 10.0 with SMA SMART CONNECTED
- Type: Data sheet
- Language: International
- Number: STP8-10-3AV-40-DS-en-20
- Version: 2.0
Sản phẩm tương tự
LG Solar
Hanwha Q CELLS
TẤM PIN MẶT TRỜI
INVENTER HÒA LƯỚI
INVENTER HÒA LƯỚI
Sungrow Inverter SG5KTL-D công suất 5kW, 1 pha (2 DC input, 2 MPPT)
CẦU CHÌ DC
LG Solar
INVENTER HÒA LƯỚI
Inverter hòa lưới SMA Tri Power Core 1 công suất 50 kW 3 pha 380V
